The front panel controls on ATEM Television Studio HD feature 8 large illuminated buttons for switching, along with audio controls, buttons for the down stream keyer, fade to black, media players, and cut-bus style or automatic switching with transitions. That means you can create a program right from the front panel! It also makes ATEM Television Studio HD perfect for things such as professional AV installations where all you need is to simply switch between sources. The built in LCD screen lets you adjust all switcher features via menus, plus it can be used for video and audio monitoring, aux control and to display the audio channel you’re adjusting.
Professional SDI Outputs
Broadcast quality connections that won’t hold you back technically.
ATEM Television Studio HD includes professional SDI program and aux outputs, along with SDI and HDMI outputs for multi view monitoring. The SDI program output lets you connect your ATEM Television Studio HD to professional decks and recorders, like HyperDeck Studio Mini, so you can record your program at the highest possible quality. The multi view SDI and HDMI outputs make it easy to monitor your program on virtually any display, including consumer HD televisions! The Aux output lets you send your switched program or a clean feed without graphics and overlays out to another display, deck, or even massive screens on stage behind a performer!
Connections
Total Video Inputs
8
Total Outputs
8
Total Aux Outputs
1
SDI Rates
270Mb, 1.5G, 3G.
Total Audio Inputs
2 x XLR.
Total Audio Outputs
None, embedded audio only.
Timecode Connections
None.
SDI Video Input
4 x 10-bit SD/HD switchable. 2 channel embedded audio.
HDMI Video Input
4 x HDMI type A, 10-bit SD/HD switchable. 2 channel embedded audio.
Reference Input
Tri-Sync or Black Burst.
Video Input Re-Sync
On all 8 inputs.
SDI Program Output
5 x 10-bit SD/HD switchable.
HDMI Program Output
None.
SDI Audio Output
2 Ch embedded into SDI output.
Computer Output
None.
Qty of Multi-Views
1
Outputs per Multi-View
1 x HD-SDI and 1 x HDMI.
Control Panel
Ethernet supports 10/100/1000 BaseT. Allows direct connection between panel and chassis, or via network. Also used for updating the software.
Standards
SD Format Support
525i59.94 NTSC 4:3 or 16:9, 625i50 PAL 4:3 or 16:9
HD Format Support
720p50, 720p59.94
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p50, 1080p59.94,
1080i50, 1080i59.94
Ultra HD Format Support
None.
SDI Compliance
SMPTE 259M, 292M and 424M.
Video Sampling
4:2:2 10-bit
Color Precision
4:2:2 10-bit
Color Space
4:2:2 YUV
HDMI Input Resolutions for Computers
720 x 480i 59.94Hz, 720 x 576i 50Hz, 1280 x 720p 59.94Hz 50Hz and 1920 x 1080p 23.98, 24, 25, 29.97,30, 50, 59.94 and 1920 x1080i 50 and 59.94Hz 60Hz.
Colorspace Conversion
Hardware based real time.
Processing Delay
6 Lines.
Audio Mixer
10 input x 2 channel mixer.
Selectable On/Off/Audio-Follow-Video.
Level and Peak metering.
Master gain control. Headphone output level control with separate mix of Program, Talkback and Sidetone.
Software
Control Panel Included
ATEM Software Control Panel included free for Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan or later and Windows 8.1 64-bit or Windows 10 64-bit.
Software Updates
Using USB connection directly connected to Mac OS X or Windows computers or via ethernet. Includes ATEM Switcher Utility.
Configuration
Set via ATEM Software Control Panel, excluding ATEM chassis IP address which is set via the ATEM Switcher Utility connected via USB to chassis.
Product Specifics
Upstream Keyers
1
Downstream Keyers
2
Chroma Keyers
1
Linear/Luma Keyers
3
Transition Keyer (Stinger/DVE)
0 and 1
Total Number of Layers
5
Pattern Generators
2
Color Generators
2
DVE with 3D Borders & Drop Shadow
1
Interface
Minimum monitor resolution of 1366 x 768.
Number of Windows
1 x 10
Routable Windows
8 routable and 2 fixed for Program and Preview.
Tally
Red for program and green for preview indication.
Tally Output
Added via ethernet connection to Blackmagic Design GPI and Tally Interface product. (Not included.)
Windows Source Labels
Yes
Control Panel Compatibilty
Includes ATEM Software Control Panel. Also compatible with ATEM 1 M/E Broadcast Panel and ATEM 2 M/E Broadcast Panel.
Multi View Monitoring
Multi View Monitoring
1 x 10 Views.
Multi View Video Standard
HD
Media Player
Media Players
2
Channels
Fill and key for each Media Player.
Media Pool Still Image Capacity
20 with fill and key.
Media Pool Clip Capacity
None.
Media Player Clip Length in 720 HD
None.
Media Player Clip Length in 1080 HD
None.
Media Player Clip Length in Ultra HD
None.
Media Pool Still Image Format
PNG, TGA, BMP, GIF, JPEG and TIFF.
Media Pool Video File Format
None.
Media Pool Audio File Format
None.
Software
Software Updates
Using USB connection directly connected to Mac OS X or Windows computers. Includes ATEM Switcher Utility.
Configuration
Set via ATEM Software Control Panel, excluding ATEM chassis IP address which is set via the ATEM Switcher Utility connected via USB to chassis.
Operating Systems
Mac OS X 10.10 Yosemite,
Mac OS X 10.11 El Capitan or later.
Windows 8.1 64-bit or Windows 10 64-bit.
Power Requirements
Power Supply
1 x internal 110 – 240V AC
Power Usage
40W
What's Included
ATEM Television Studio HD
SD card with software and manual
Warranty
12 Months Limited Manufacturer's Warranty.
Repair policy
Warranty details can be found in the ATEM Switchers Operation Manual in the support page at www.blackmagicdesign.com.
https://www.blackmagicdesign.com/products/atemtelevisionstudio